How to program Citroen key fob with Lexia 3 Diagbox V7.57 diagnostic tool

Diagnostic tool needs:
Lexia 3 V48 with Diagbox V7.57 diagnostic tool

Computer requirement:
A laptop running Windows XP home

Main procedure:
Ⅰ Key programming procedure
Ⅱ Synchronization of HF PLIP remote controls

NOTE:
The vehicle keys are allocated to a single BSI. Vehicle keys are located to the new and old key and than have them installed on a situation. Initializing a new key will require all the keys to be initialized.

Ⅰ Key programming procedure

1) Register the keys
2) Initializing a new key procedure
1. After well installed and activate the Lexia 3 Diagbox V7.57 software, come to the main program
2. Select "DIAGNOSIS" function in the main menu
3. Select vehicle model in Vehicle Selection menu
4. Select "GLOBAL TEST"
5. Select "BSI ECU"
6. Select "INITIALISATION"
7. Select "KEY INITIALISATION"
Follow the instructions given in the OBD diagnostic tool Daigbox software.

NOTE:
The "PARAMETER MEASURES" menu can be used to check the number of keys initialized. The number of keys initialized indicates the total number of vehicle keys. The number of HF PLIPS initialized indicates the number of HF keys initialized.

Ⅱ Synchronization of HF PLIP remote controls

When replacing the batteries of an HF PLIP remote control, it is necessary to resynchronize the remote control.

1) Put the HF key to be synchronized in position "ignition +"
2) Press one of the HF key buttons within the next 10 seconds
3) Release the HF key button
4) The ignition key HF PLIP is synchronized.
5) Repeat and perform previous operations for the other keys equipped with HF remote control.
6) Perform a locking / unlocking test of the vehicle doors and tailgate. If the locking / unlocking test of the doors and tailgate fails, restart the synchronizations of all the ignition keys equipped with HF PLIPS.

(Tested) Lexi3 PP2000 Diagbox for Peugeot and Citroen vehicle model coverage

Having been playing around lexia 3 diagnostic tool for PSA groups, I have tested successfully on lots of Citroens and Peugeots. Since there is no detail function and vehicle list on the webpage (as list where mine from), I should be first one.



My Lexia 3 PP2000 OBDⅡtool: $79 from UOBD2



Package includes:

Lexia 3 (full adaptors) and 30 PIN connector



PSA: Lexia -3 protocol K+CAN, Citroen, Peugeot 1995-2010

PSA: Lexia -3 30 PIN connector before 1996

Software version:

Lexia 3 V45

PP2000 V25

Diagbox V5.75

Lexia 3 diagnostic tool function achieves:



1. Read/ Erase trouble codes

Display all stored and pending faults codes with full description, e.g “Rail pressure-too low pressure”

Program support report or copy to clipboard



2. Read identification

Displays full identification if ECU control units, e.g part number, software/hardware version



3. Auto scan

Detect all ECU control units in the car and read diagnostic faults codes



4. Actuator test / customize settings

Activates particular actuators, like lock/unlock wheel, lock/unlock door, enable fuel pump etc



5. Programming functions

Lexia 3 is able to access multi-system, like engine, transmission, brake, airbag, immobilizer, body to proceed configuration programming



6. Measured values



Display live data, like engine speed, battery voltage, oxygen sensor, coolant temper,



7. Customize settings

Activate cruise control, disable DRL (daytime running lights), disable TPMS lights etc.



Tested vehicle models with Lexia 3 PP2000 diagbox



Citroen:

1995 Citroen XM 2.5 TD Norway

1998 Citroen XantiaⅡ2.0 16V Russia

1998 Citroen XM 2.0 TurboCT Portugal

2001 Citroen C5 HDi Portugal

2001 Citroen C5 2.0 HPi V16 Netherland

2001 Citroen Saxo 1.1 Finland

2001 Citroen 2.0 HDi 90hp Belarus

2001 Citroen 2.2 HDi Poland

2002 Citroen Evasion 2.0HDi RHW Belarus

2003 Citroen C3 1.4 Auto UK

2003 Citroen Xsara Picasso 1.8 16V Netherland

2003 Citroen Xsara Picasso 1.8 16V SX Finland

2004 Citroen Xsara 1.6 V16 110hp Belarus

2007 Citroen C5 2.0 HDi Hungary

2008 Citroen C3 1.4 Finland

2009 Citroen C4 1.6 THP Greece

2010 Citroen C4 HDi Argentina





Peugeot Planet 2000 for Peugeot:



1997 Peugeot 406 1.8i XU7JP4 Belarus

1998 Peugeot 106 Electric Norway

1999 Peugeot 406 2.0 HDi 90hp Belarus

2001 Peugeot 206 XR 1.6 V8 Argentina

2001 Peugeot 406 2.0 HDi 110hp Belarus

2001 Peugeot 406 2.2 HDi Finland

2001 Peugeot 607 2.2 HDi Diesel Ireland

2002 Peugeot 206 Petrol Russia

2002 Peugeot 307 2.0HDi Finland

2002 Peugeot 406 1.8i EW7J4 Belarus

2003 Peugeot 406 2.0 HDi 110hp Belarus

2003 Peugeot 307 1.6 XS Petrol Malaysia

2004 Peugeot 307 1.6 HDi SXI 56 UK

2005 Peugeot 307 2.0 HDi SW 100Kw V16 Austria

2006 Peugeot 407 2.0 HDi UK

2007 Peugeot 207 1.6 V16 Argentina

2007 Peugeot 307 1.6 Hdi Finland

2010 Peugeot 307 1.6 V16 Argentina



ALL the test results are based on Lexia 3 V45, the latest V48 adds more model possibility, especially Peugeot 307. Because V45 works week on Pug 307 module.

How to solve Citroen and Peugeot Lexia 3 PP2000 central locking problem

Vehicle example:
Peugeot 307 2.0 HDi 2005

Diagnostic equipment:
Lexia 3 Peugeot Planet PP2000 for Citroen and Peugeot OBDⅡdiagnostic interface

Problem:
New Pug 307 comes with one original key, so I have to make a new backup key. Got a blank key and got the key cut and programmed with lexia 3 PP2000 diagnostic software. Then I have two new keys that can start the car.

The problem is I can't get the central locking bit to sync (key fob stopped working). At first I doubted the IGN+ position (with engine ON or OFF at the same time). Soon I figured out that I should leave the ignition switch ON without starting the engine.

I got a good key programming document with PP2000 and followed it step by step:
How to program Peugeot new key with Lexia3 PP2000 diagnostic tool

I was stopped at the learning transponder key procedure. I search around Pug forums and finally got the answer.

Solution:
The problem lies on the lexia 3 PCB.

There are different types of PCB on the aftermarket:
1. Original keys which works fine
2. Copy keys sometimes PCB sometimes does not work
3. Second hand keys PCB can not be programmed again

Make sure you get the correct PCB, take this one on uobdii.com
1. Lexia-3 PCB edge is golden with original full chips. Double PCB has 7pcs optocouplers, which are 100% original and new.
2. lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
3. PP2000 has 2pcs Optocouplers.

How to disable Citroen DS3 DRLs with Lexia 3 Diagbox diagnostic tool

Lexia3 Diagbox is possible to erform various customize settings, disable day time running lights (DRLs) included. Latest Lexia3 V48 Diagbox V5.75 is available in eobd2.fr at a perfect price €65. 

Here is the step-by-step guide of turning off DRLs with lexia 3 Diagbox diagnostic interface:

1. Install Lexia 3 Diagbox software 

How to install Diagbox V7.57 for Lexia-3 PP2000 Citroen and Peugeot

http://www.obd-software.com/install-diagbox-v7-57-lexia-3-pp2000-citroen-peugeot/

2. Plug the lexia 3 diagnostic interface into the OBD socket 

3. Select Citroen in Brand selection menu 

4. Select vehicle model: DS3

Validate VIN (Check mark)

5. Select Diagbox application 

6. Select Global Test 

7. Select Diagnosis 

8. Select Built-in System interface (BSI)

9. Scroll down to Vehicle Configuration, click OK

10. You will be able to view lists of customize settings, like hazard warning lamps, fog lamps day time running lamps etc. 

Click Simultaneous illuminations of the day running lights and sides lights, change the status “yes” to “NO”

Daytime running lights are successfully disabled. 

Lexia3 Diagbox is possible to erform various customize settings, disable day time running lights (DRLs) included. Latest Lexia3 V48 Diagbox V5.75 is available in eobd2.fr at a perfect price €65. 

Here is the step-by-step guide of turning off DRLs with lexia 3 Diagbox diagnostic interface:

1. Install Lexia 3 Diagbox software 

How to install Diagbox V7.57 for Lexia-3 PP2000 Citroen and Peugeot

http://www.obd-software.com/install-diagbox-v7-57-lexia-3-pp2000-citroen-peugeot/

2. Plug the lexia 3 diagnostic interface into the OBD socket 

3. Select Citroen in Brand selection menu 

4. Select vehicle model: DS3

Validate VIN (Check mark)

5. Select Diagbox application 

6. Select Global Test 

7. Select Diagnosis 

8. Select Built-in System interface (BSI)

9. Scroll down to Vehicle Configuration, click OK

10. You will be able to view lists of customize settings, like hazard warning lamps, fog lamps day time running lamps etc. 

Click Simultaneous illuminations of the day running lights and sides lights, change the status “yes” to “NO”

Daytime running lights are successfully disabled. 

How to bleed brake for Citroen C5 with Lexia 3 Diagbox diagnostic tool

Equipment:
Lexia 3 V48 Diagbox V7.57 diagnostic interface

Install Lexia Diagbox software
Select Citroen in Brand selection menu
Select vehicle model: C5->C5

Click Tick mark to confirm ACTIVATION notice
Select application as LEXIA
Enter Activation code to activate

Back to APPLICATION menu and select second option
Select Diagnosis

Select Test by function

Switch off the ignition and switch it on again
Select driving aids (4th option)

Pull down the list and select road holding (ABS…)

The system is searching for the vehicle configuration

There are four options under road holding menu:
BSI
Instrument panel
Injection
Anti-lock brake system

Change Instrument panel, Injection and Anti-lock brake system to YES by click corresponding icons

Build communication with ECU
Accept Ecu ESP-MK60 Validate to continue
Accept the system pop-up message
Select “Bleeding” in next interface

Accept windows notice and follow the screen instructions
Bleeding Citroen C5 brake system procedure is complete