Free download Diagbox V7.82 for Lexia 3 PP2000 Peugeot Citroen scanner

Diagbox V7.82 software can work on Lexia 3 PP2000 Peugeot Citroen scanner. Here are Diagbox V7.82 free download links offered by uobdii.com.

Free download Diagbox V7.82 for Lexia 3 PP2000 Peugeot Citroen diagnostic tool

Link 1:

https://mega.nz/#!h9kFlDrZ!DCpvnmCPB_NDm-wFrea0mGiKDE5giM96-lSXXC1uSIg

Pass: Maitresox01

Or Link 2:

https://drive.google.com/file/d/0BxwoEOC3feWFNl96dTNzVWlqY3M/view?usp=sharing



Install Diagbox V7.82 for Lexia 3 PP2000 on VirtualBox or VMplayer:

a) Ensure that the Hard Disk controller is set to IDE not SCSI.

b) Create a preferably fixed hard drive 20-36GB preferably contiguous, Dynamic also works. (Win XP needs less resource than Win 10)

c) Connect the Windows ISO through the Settings -> Storage menu.

d) Install VirtualBox Guest Additions or VMWare Tools after installing Windows.



Install Diagbox V7.82 for Lexia 3 PP2000 on Windows:

a) Microsoft .NET 3.5 SP1 Framework (needed for Diagbox 7.60+)

b) All necessary drivers (usually covered by the Guest Additions/VMWare Tools)

c) Setup a network adapter (does not need to be connected to network)

d) Mozilla Firefox

e) Winrar

f) Virtual CloneDrive (not needed for Virtual Machines)



Note:

1. Start only as Administrator and without internet, for those who are running later Windows like 10, XP SP3 compatibility is also required.

2. Ensure that .NET Framework 3.5 is installed

3. Systems: Windows (32 bit only) XP, 7, 8, 10



These two forum threads may be helpful:

http://cartechnology.co.uk/showthread.php?tid=11986

http://cartechnology.co.uk/showthread.php?tid=12288

Article form OBD2 Blog Site:  http://blog.uobdii.com/free-download-diagbox-v7-82-for-lexia-3-pp2000-peugeot-citroen-scanner/

(Solved)Lexia-3 PP2000 installation error: not possible to start

Recently received an issue from customer that when install Lexia-3 on windows XP, it appeared an error as follows, here uobdii engineer would give some tips for this problem.
Error message:
AVERTISSMENT
It is not possible to start Peugeot Planet Office for the following reasons:
Peugeot Planet interface is not plugged into the USB port of your PC
Peugeot Planet interface is being utilisation by another application.
 
Device: Lexia-3 pp2000

Software: Peugeot Planet 2000
Operating system: Windows XP

Possible reasons and solutions:

1. Host interface of Peugeot Planet can not be connected to the computer’s USB port;
2. Peugeot Planet 2000 is running on another computer;
3. After closing the other software, then run Peugeot Planet again.

PP2000 software installation address:
https://mega.nz/#!mRkVXBLa!Fez0E9LU5DJSYFsy6jc_2cydO-69U0VJ7zX3i3T8_vc


Article from:http://blog.uobdii.com/solvedlexia-3-pp2000-installation-error-not-possible-to-start/

Lexia 3 PP2000 Diagbox with original 921815C works on 407/C5

Some Lexia 3/XS Evolution diagnostic interface owners reported that normal lexia-3 PP2000 V25 Diagbox V7.57 can not work on Peugeot 407, but better quality lexia3 firmware are possible to access even Pug407 till 2014 year. uobdii.com has several lexia cables in stock. Item No SP08-C is the best quality with original 921815C chip that works on Peugeot 407 and Citroen C5.
If you want to get real picky and go for best quality chips and check for NEC chips exactly like ours:
Best quality LEXIA 3 V48 PP2000 V25 Diagbox V7.57 with original 921815C chip PCB board:

PS: Different Lexia 3 PP2000 Diagbox comparison table list:

Some Lexia 3/XS Evolution diagnostic interface owners reported that normal lexia-3 PP2000 V25 Diagbox V7.57 can not work on Peugeot 407, but better quality lexia3 firmware are possible to access even Pug407 till 2014 year. UOBD2.NET has several lexia cables in stock. Item No SP08-C is the best quality with original 921815C chip that works on Peugeot 407 and Citroen C5.
If you want to get real picky and go for best quality chips and check for NEC chips exactly like ours:
Best quality LEXIA 3 V48 PP2000 V25 Diagbox V7.57 with original 921815C chip PCB board:

PS: Different Lexia 3 PP2000 Diagbox comparison table list:

How to program Citroen key fob with Lexia 3 Diagbox V7.57 diagnostic tool

Diagnostic tool needs:
Lexia 3 V48 with Diagbox V7.57 diagnostic tool

Computer requirement:
A laptop running Windows XP home

Main procedure:
Ⅰ Key programming procedure
Ⅱ Synchronization of HF PLIP remote controls

NOTE:
The vehicle keys are allocated to a single BSI. Vehicle keys are located to the new and old key and than have them installed on a situation. Initializing a new key will require all the keys to be initialized.

Ⅰ Key programming procedure

1) Register the keys
2) Initializing a new key procedure
1. After well installed and activate the Lexia 3 Diagbox V7.57 software, come to the main program
2. Select "DIAGNOSIS" function in the main menu
3. Select vehicle model in Vehicle Selection menu
4. Select "GLOBAL TEST"
5. Select "BSI ECU"
6. Select "INITIALISATION"
7. Select "KEY INITIALISATION"
Follow the instructions given in the OBD diagnostic tool Daigbox software.

NOTE:
The "PARAMETER MEASURES" menu can be used to check the number of keys initialized. The number of keys initialized indicates the total number of vehicle keys. The number of HF PLIPS initialized indicates the number of HF keys initialized.

Ⅱ Synchronization of HF PLIP remote controls

When replacing the batteries of an HF PLIP remote control, it is necessary to resynchronize the remote control.

1) Put the HF key to be synchronized in position "ignition +"
2) Press one of the HF key buttons within the next 10 seconds
3) Release the HF key button
4) The ignition key HF PLIP is synchronized.
5) Repeat and perform previous operations for the other keys equipped with HF remote control.
6) Perform a locking / unlocking test of the vehicle doors and tailgate. If the locking / unlocking test of the doors and tailgate fails, restart the synchronizations of all the ignition keys equipped with HF PLIPS.

How to activate Peugeot cruise control with Lexia 3 PP2000 diagnostic tool

Please check that your vehicle can be retrofitted with cruise control before purchasing any parts or paying to activate cruise control in your ECU. Cruise control will not function unless the foot pedal, control stalk and master on/off switches are all present, adjusted correctly and working normally.

Tool needs:
Lexia 3 V48 Peugeot Planet PP2000 V25 diagnostic tool

Vehicle model example:
Peugeot 406 HDi 90 2001

Instructions:

1. Install and activate lexia 3 PP2000 software. Select vehicle model. Select the application as PEUGEOT PLANET 2000.

2. The system will identify and configure vehicle information. Then select “ECU configuration and services”

3. Select “Test by ECU”

4. Select “Engine/automatic gearbox”

5. Select “Petrol” or “Diesel” according to your vehicle. Here select “Diesel”

6. Select the correct ECU for your vehicle. Variant can usually be identified from VIN code on left.

7. Switch on the ignition. Connect the portable to the test connector C001. Then the system is identifying and reading of the ECU in progress.
Select “Configuration” option in Carry out the tests menu

8. Select “Cruise Control” among various ECU modules and change this option to “present (activated)”

9.  Click “OK” to validate.

10. Click “Configure” button to save settings. Wait patiently for a few seconds don’t click anything else.

11. Click “Yes” for saloon and “No” for estate car
Click OK to validate
Open “Configuration” again to check that the changes have been recorded
Exit the program if settings have been saved

If you want to know more info,pls visit:
http://www.uobdii.com/wholesale/lexia-citroen-peugeot-diagnostic-pp2000-with-diagbox-software.html

Lexia 3 PP2000 Diagbox Customize Achieves on Win7/Win8

One of the Mitsubishi evoxforums forum members has realized some cool Customize setting with Lexia3 PP2000 Diagbox diagnostic interface on win 8 operating system.

Tools needs:
Lexia 3 Diagbox software
A virtual machine running Win7 or Win 8 O/S (at least 30GB RAM)

NOTE: Ensure your close any anti-virus software and other existing program, otherwise, the software data may be destroyed or lost.

Install Lexia 3 Diagbox
1) Copy the Diagbox 7.02 ISO and three files in the CD to the computer, or download them in the link here:
https://mega.co.nz/#F!t1oSRCQa!BFnBi1gIFZ4cyd6MbZTsQg
The software is too large to upload. It will take you around 2-3 hours.

2) Install a virtual machine on your computer. Make sure your Win7/Win 8 system is able to mount Diagbox7.02 ISO image without other mounting software.

3) Install Diagbox-setup. exe driver.

4) Tick “Activation” mark (third option) to activate the software.

5) Manually enter the activation code: 1234567

6) The green button will prompts you to install Lexia 3 PP2000 software. Make sure your computer meets the enough RAM. Otherwise, it will fail to install. After installation complete, tick the green mark. 

7) Enter and complete the information: 6 1's in Address; 8 1's in Post Code & Car-Phone

8) Select No option to close the program

Update Lexia 3 Diagbox
9) Open the Diagbox 7.02 setup exe on the computer. It will run self upgrade automatically. Close it after complete upgrade procedure. Copy a file marked red below from the file <C:\AWRoot\bin\fi called "APPDIAG.SYS">. Then paste and save it to the desktop.

10) Run the update file one by one and run the new Diagbox.exe setup. Wait for that to finish the update. Repeat the procedures until you get the Diagbox version to V7.30 by using the access code for these updates "scary01". Restart the computer after upgrade is complete.

11) Run the Diagbox exe. setup and connect the Lexia 3 diagnostic interface to the computer and vehicle’s OBD port.
12) Select vehicle manufacture Citroen or Peugeot

13) Select Vehicle model, for example Citroen>>C-Crosser

If the window prompts "Do you want to automatically configure..." note, select No option but do not select green mark (Yes) option.

Then start to enter the ETAC Customize setting.

Select Vehicle make: Citroen
Select vehicle model: C-Crosser
Validate VIN (Check mark)
Diagbox
Repair

Global Test runs

Built-in System interface (BSI)

ETACS_SUV? Screen (two options offered)

Configuration
Manual Configuration

Switch on Ignition' screen

Check mark
Vehicle Configuration
Programming By Default

If the system asks: “There are two ways to configure list of default parameters: Do you want to configure the default parameters automatically? “ Select NO.

Move to the next ETAC program to select corresponding options, like disable DRLs, disable TPMS, enable auto-lock with vehicle speed, re-calibrate speedometer with different size tires etc.
                        
                                              

Lexia 3 PP2000 Citroen Peugeot Diagnsotic Interface

Lexia 3 PP2000 is popular auto diagnostic tool for Citroen and Peugeot.The Citroen Software is Lexia 3,the newest version is V48.Peugeot software is PP2000,the newest version is V25.It can be updated by CD.Lexia-3 PP2000 has powerful function which can support read identification, read fault codes, clear fault codes,auto-scan etc.

LEXIA-3 PP2000 Support Multi-Language:

English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.

LEXIA-3 PP2000 Support Vehicles:

1.Lexia 3 is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on.

2.PP2000 is compatible with most Peugeot cars from 1995.New version support Peugeot 307.

3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

LEXIA-3 PP2000 Function:

1.Read Identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

2. Read Fault Codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.

3. Clear Fault Codes
this function clears all stored fault codes and other diagnostic information.

4. Auto-Scan (Complete Car Scan/Test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6. Actuator Test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

LEXIA-3 PP2000 Hardware and Software Requirements:

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.


Go To Check More Details: Lexia-3 V48 PP2000 V25

English Version:

Francaise Version: