Friday, September 23, 2016

Lexia3 PP2000 Car Diagnostic Tool for Citroen &Peugeot

Are you in a dilemma choosing a fault code scanner for Peugeot 307 Hdi 135 Baujahr 2007? Diagnose for Citroen Saxo Bj 2004? Is it fit for 2006 C5 2.0 HDI? And how to work with XM 3.0 V6 built in 2000? How to diagnose for Peugeot 407 HDi?

These could be difficult problems for an empty-handed person, but it becomes very simple for you just need only Lexia3 PP2000.
It is compatible with Citroen cars including:
C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on

Function of Lexia3/PP2000
Unlike other universal car diagnostic tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool.
lexia3-pp2000-car-diagnostic-tool-1
  1. Read Identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
  1. Read Fault Codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").Program supports report printing or copy to clipboard.
  1. Clear Fault Codes
This function clears all stored fault codes and other diagnostic information.
  1. Auto-Scan (Complete Car Scan/Test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
  1. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
  1. Actuator Test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc.)
 lexia3-pp2000-car-diagnostic-tool-2

How to test old Citroen and Peugeot
For most cars before 1996, you need old adapter 30 pin-Adapter
For the XM Y4 (1994-2000) you need the 30 pin-Adapter, Lexia-3 30 Pin Cable for Citroen Diagnostic Tool

How to test new Citroen and Peugeot
lexia3-pp2000-car-diagnostic-tool-3
Software Diagbox supports the latest Citroen and Peugeot. But most Lexia3 package has no this interface, you just need S1279, it can connect lexia3 with new cars.
Free download Diagbox V7.82 for Lexia3/PP2000 here:
http://blog.uobdii.com/free-download-diagbox-v7-82-for-lexia-3-pp2000-peugeot-citroen-scanner/

Monday, September 19, 2016

Free download Diagbox V7.82 for Lexia 3 PP2000 Peugeot Citroen scanner


Diagbox V7.82 software can work on Lexia 3 PP2000 Peugeot Citroen scanner. Here are Diagbox V7.82 free download links offered by uobdii.com.






Free download Diagbox V7.82 for Lexia 3 PP2000 Peugeot Citroen diagnostic tool

Link 1:

https://mega.nz/#!h9kFlDrZ!DCpvnmCPB_NDm-wFrea0mGiKDE5giM96-lSXXC1uSIg

Pass: Maitresox01

Or Link 2:

https://drive.google.com/file/d/0BxwoEOC3feWFNl96dTNzVWlqY3M/view?usp=sharing



Install Diagbox V7.82 for Lexia 3 PP2000 on VirtualBox or VMplayer:

a) Ensure that the Hard Disk controller is set to IDE not SCSI.

b) Create a preferably fixed hard drive 20-36GB preferably contiguous, Dynamic also works. (Win XP needs less resource than Win 10)

c) Connect the Windows ISO through the Settings -> Storage menu.

d) Install VirtualBox Guest Additions or VMWare Tools after installing Windows.



Install Diagbox V7.82 for Lexia 3 PP2000 on Windows:

a) Microsoft .NET 3.5 SP1 Framework (needed for Diagbox 7.60+)

b) All necessary drivers (usually covered by the Guest Additions/VMWare Tools)

c) Setup a network adapter (does not need to be connected to network)

d) Mozilla Firefox

e) Winrar

f) Virtual CloneDrive (not needed for Virtual Machines)



Note:

1. Start only as Administrator and without internet, for those who are running later Windows like 10, XP SP3 compatibility is also required.

2. Ensure that .NET Framework 3.5 is installed

3. Systems: Windows (32 bit only) XP, 7, 8, 10



These two forum threads may be helpful:

http://cartechnology.co.uk/showthread.php?tid=11986

http://cartechnology.co.uk/showthread.php?tid=12288

Article form OBD2 Blog Site:  http://blog.uobdii.com/free-download-diagbox-v7-82-for-lexia-3-pp2000-peugeot-citroen-scanner/

Friday, September 9, 2016

(Solved)Lexia-3 PP2000 installation error: not possible to start

Recently received an issue from customer that when install Lexia-3 on windows XP, it appeared an error as follows, here uobdii engineer would give some tips for this problem.
Error message:
AVERTISSMENT
It is not possible to start Peugeot Planet Office for the following reasons:
Peugeot Planet interface is not plugged into the USB port of your PC
Peugeot Planet interface is being utilisation by another application.
 Lexia-PP2000-install-error
Device: Lexia-3 pp2000

Software: Peugeot Planet 2000
Operating system: Windows XP

Possible reasons and solutions:
  1. Host interface of Peugeot Planet can not be connected to the computer’s USB port;
  2. Peugeot Planet 2000 is running on another computer;
  3. After closing the other software, then run Peugeot Planet again.

PP2000 software installation address:
https://mega.nz/#!mRkVXBLa!Fez0E9LU5DJSYFsy6jc_2cydO-69U0VJ7zX3i3T8_vc


Article from:http://blog.uobdii.com/solvedlexia-3-pp2000-installation-error-not-possible-to-start/